With traditional shoes and sneakers, you can quickly loop, swoop the laces to tie the shoes, but that’s not the case when you are tying logger boots.
Lacing the logger boots is a bit more complicated and time-consuming than regular sneakers. Hence you must know How To Lace Logger Boots.
Furthermore, incorrect lacing on logger work boots is not suitable for your feet. This is because they will provide too little support to your foot, especially while walking or climbing.
Likewise, logger boots that are not laced adequately can be too snug and put additional stress on critical areas of your feet.
In short, if you don’t know how to lace up logger boots correctly, the result will be aggravating discomfort and other foot issues. So, we are writing some best ways to lacework boots. Have a look:
We have also posted about Why do logger boots have high heels
how to lace boots properly
1. Traditional Ladder Lacing
Ladder lacing is the perfect method for logger boots and other work boots that provides you with the best support and comfort. When tied correctly, it will keep your shoes firmly in place no matter where you are using them.
Here is how you do it:
First of all, run down the laces through the back of the shoe eyelets. Then, run the laces to the opposite eyelet (vertically), then run it through the upper’s back and through to the upper.
Next, run the shoelace one part under the opposite lace, and pull tightly. Then place the lace of your logger boot through the next hole vertically and keep repeating in this way till you reach the end/top.
After reaching the top, tie them usually. In this method, you create or tying your laces in an interlocking ladder design, and each part of the lace is kept under the other.
This logger boot lacing method is perfect for outdoor adventures such as hiking, logging, climbing, and paratroopers can also use this shoelace tying method.
pros of Ladder Lacing
This boot lacing style is ideal if you want a secure closure. The method works seamlessly and keeps your heels snugger.
In addition, the boots will not slide from your feet; thus, your feet will be comfortable and safe no matter where you are walking. Unlike, this lacing technique is simple as it includes just top hooks or eyelets.
Cons of ladder style lacing
The significant issue with this method is that it is time-consuming and a little bit complicated for beginners. However, if you know exactly how to use it, as mentioned above, the knot of your logger boots will work flawlessly in all conditions.
In addition to this, this method will not work if you have cheap shoelaces. It would be best if you had sturdy and long laces to use this logger boot tying technique.
2. Heel-Lock Lacing Pattern
The Heel-lock lacing for logger boots is practical, and you can use this method for any work boots. However, to be precise, the technique works best for hunting boots, logger boots, climbing boots, and other boots.
This method makes this method more effective than the others because it offers excellent security and a much better hold on the boot heel. Moreover, this shoe lacing method is also straightforward.
You can do it with shoe eyelets or hooks. To use a heel lock lacing system, follow the process mentioned below:
First, tie your logger boots with the usual crisscross pattern until you reach the last two eyelets or hooks.
Next, run the laces vertically so that each lace goes straight from a hook or eyelet to the above hook or eyelet. Then, tie each lace with the opposite one, and keep it above the top curve.
Pros of Benefits of Heel Lock lacing
This logger lacing method works well, especially for your heels, and provides snugger fit and closure.
Furthermore, your feet will remain in place as the foot movement inside the boot will be minimal. This method also prevents ankle injuries as it offers more excellent ankle support than the traditional tying methods.
Cons of the Heel-Lock Method
We didn’t notice any significant drawbacks of this method. The only minor issue that we noticed is that the procedure is more time-consuming than the others.
3. The 2-1-3 Lacing Method For Logger Boots
Another lacing method you can use to tie up your logger boots is the traditional 2-1-3 lacing method.
This method is perfect for you if you don’t want that “lace bite” problem. To lace up your logger work boots through the 2-1-3 lacing method.
Follow this procedure:
The first step is to identify the top three pairs of eyelets. Next, start lacing in a usual way until you reach the bottom.
Keep the shoelaces across the three eyelets, then back transversely to the first eyelet, and finally to the third eyelet, which you will find around your ankle area. ( Now you understand why it is called “2-1-3 method)
In the end, tie the laces typically till the boot’s top.
Pros of using 2-1-3 Lacing Method
This is the most comfortable lace tying method for your feet. However, you might face pinching and other similar problems if you tie the laces too tightly. Plus, it is the ideal method for logger boots and works boots.
Cons of 2-1-3 method
The method is too complicated, especially for new users.
4. Army Lacing Technique
Have you ever wondered which shoe lacing technique military personnel use? If not, the answer is in the above heading; the method is called Army lacing technique.
But, you might be thinking, what does it have to do with the logger boots? Let me tell you, this method is designed to manage the rigidness and inflexibility of military shoes, but it also works for logger boots and works boots.
To tie the laces using the Army Lacing method, follow these steps:
Start from the lowest eyelet, and tie your laces from outside to inside.
Next, thread the shoelaces in an upward direction through the next eyelets but don’t cross them. Then, thread them from opposite sides through the eyelets, and the other eyelets set vertically.
Keep doing till you reach the end and then tie your laces typically. After that, you will see that all the verticals are outside, and the crossovers are inside. If that’s not the case, you have not done it correctly.
Pros of Army Lacing Method
The most significant benefit of the Army lacing method is that it allows free and comfortable movement of your feet without any restriction. And it is comfortable as well.
Cons of Army lacing method
This lacing method can be time-consuming, especially if you have a high logger or work boots. Plus, the ankle support is limited as well as the others.
Bottom Line
Now that you know how to lace logger boots. You can try any of these methods and walk comfortably on any terrain.
Furthermore, these lacing methods are not only effective for logger boots, but you can also use them for other work boots.
If you are still unsure how to tie logger boots or have any questions about how to lace up your logger work boots, don’t hesitate to get in touch with us!
FAQ About: How To Lace Logger Boots
What is the best way to lace boots?
All the boot lacing techniques mentioned in this guide are effective, but when it comes to the best way to lace up your boots, we recommend heel lock lacing as it is comfortable and provides the needed support for your ankle and feet.
How tight should you lace work boots?
Keep your work boot laces a bit tight but not that tight. That is why experts recommend that after tying your laces, walk a little bit before heading out. And this method applies to all boots, not just loggers or work boots.
Why are boot laces so long?
By providing long shoelaces, makers want to make sure that you can use any lacing method to tie your boots.
That is why you will mostly see long laces, especially in logger boots and work boots. However, you can shorten them if you find long laces annoying.
![Best Waterproof Winter Hunting Boots [Cold Weather boots 2022]](https://shoesknowledge.com/wp-content/uploads/2021/02/Waterproof-Winter-Hunting-Boots.png "Best Waterproof Winter Hunting Boots [Cold Weather boots 2022]")
